Importance Of Diet for Building Muscle over 50
I’m going to be primarily focusing on the topic of Building Muscle Over 50. However, any muscle building workout is going to have limited success without a solid nutritional foundation. Good nutrition is especially important for building muscle as you age because your body’s natural muscle building processes become less efficient, so your body becomes more dependent on high-quality foods for creating muscle. So, before I start talking about muscle building exercises, I’m going to give you a brief introduction to what you need to be eating to get the most from your workouts.
Table of Contents
1. Every Meal Should Have a good serving Of Protein.
Protein is an important macronutrient that’s responsible for building, maintaining and repairing all your body’s cells, the secret of increasing muscle mass is consuming protein with every meal. Protein is found in both animal and plant-based foods with some of the best food sources including:
- Dairy.
- Fresh fish.
- Fresh meats.
- Nuts.
- Seeds.
2. Include Healthy Fats In Your Diet
Many people try to restrict their fat consumption as they wrongly believe eating fats makes you fat. While fat is higher in calories than carbohydrates and protein (fat contains nine calories per gram whereas carbohydrates and protein contain four calories per gram), so eating a lot of it can lead to weight gain and extra body fat, it’s also an essential nutrient that you need to be eating.
Healthy fats don’t directly contribute to muscle growth but they do keep your bones and joints healthy and both these parts of your body are constantly engaged when you perform muscle building exercises. They also support all your vital organs and this ensures that your body can use protein to build muscle as efficiently as possible.
Like protein, healthy fats can be sourced can be sourced from a range of plants and animals with some of the top healthy fat foods including:
- Coconut.
- Dairy.
- Fatty fish.
- Extra virgin olive oil.
- Nuts.
- Red meats.
- Seeds.
3. Choose Quality Carbohydrates
Carbohydrates are a double-edged sword when it comes to building muscle. Filling up on the wrong kind of carbohydrates can cause your energy levels to crash and burn and give you no nutritional benefit. However, eating quality carbohydrates will give you a constant supply of energy during your workouts and also supply you with a range of vitamins and minerals which will allow your body to function effectively at all times.
To ensure that you’re eating quality carbohydrates, avoid anything processed (such as bread, cakes, cookies, pasta and sugary products) and instead go for fruits and vegetables. Also, try to incorporate a wide range of fruits and vegetables into your diet so that you can enjoy a mix of vitamins and minerals and give your body all the essential nutrients it needs.
Equipment for Building Muscle Over 50
As I mentioned at the start of this guide, learning about all the different types of equipment for building muscle over 50 can seem very daunting when you’re just starting out. However, they can be grouped into three main categories and once you understand these three main categories, learning how they help you build muscle becomes a lot easier. In this chapter, I’ll be discussing these three main types of muscle building equipment and their individual pros and cons.
1. Dumbbells
Dumbbells consist of a small bar which has a weight on either end. This small bar acts as a handle and is designed to be held in one hand. The weights at either end then provide resistance as you perform exercises with the dumbbell.Dumbbell Pros: The main advantage of dumbbells is that they allow you to exercise your left and right side in isolation and eliminate the possibility of the stronger half of your body compensating for the weaker half. For example, if you perform a dumbbell chest press, your left and right-hand side must exert an equal amount of force to complete the exercise. If you perform a chest press with a barbell or on a machine, the stronger half of your body can do more of the work and this sometimes leads to uneven muscle development.Dumbbell Cons: The main disadvantage of dumbbells is that since your left and right side are working in isolation, you can’t lift as much weight compared to when they work collaboratively. For example, if you can lift 200lbs when performing a barbell chest press (an exercise where your left and right side work together to lift the weight), you may only be able to lift two 75lb dumbbells (a total of 150lbs) when performing a dumbbell chest press.
2. Barbells
Barbells consist of a large bar which has a weight on either end. This large bar acts as a handle and is designed to be held with both hands. The weights at either end then provide resistance as you perform exercises with the barbell.Barbell Pros: The main advantage of barbells is that they allow you to combine the strength in the left and right-hand side of your body and lift a greater total amount of weight than if you were exercising the left and right-hand side of your body in isolation.Barbell Cons: The main disadvantage of barbells is that since you are using both your left-hand side and your right-hand side collaboratively, there’s a chance that the stronger side of your body may compensate for the weaker side of your body which can lead to uneven muscular development.
3. Machines
Muscle building machines come in all shapes and sizes, depending on the muscle groups they are targeting. They generally have an adjustable stack of weights and an adjustable seat. To operate them, you generally adjust the seat height, sit down then pull, press or lift the handle.
Machine Pros: The main advantage of the machines is that they guide you fully through the exercise, ensuring that you execute it with the proper form and the proper range of motion. For example, if you perform a machine chest press, you can’t wobble the handles from side to side or bend your elbows too far. However, with a barbell or dumbbell chest press, your arms can wobble or your elbows can dip too deep.
Machine Cons: The main disadvantage of machines is that since they guide you through the exercise, none of your stabilising muscles get brought into play and as a result, you only work a limited number of muscles. For example, when you perform a barbell or dumbbell chest press, there are lots of secondary muscles in your arms, back, chest and shoulders which are constantly working to keep the weight balanced. When you perform a machine chest press, these muscles are no longer required.
Building Muscle Over 50 Terms Explained
Now that you know all about building muscle over 50 workout equipment that you’re likely to see on health and fitness websites and hear being shouted out by trainer in the gym. In this chapter, I’ll be doing just that and explaining exactly what these terms mean.
1. Reps
Reps or repetitions refer to the amount of times you perform a specific exercise. For example, eight reps of bicep curls simply refers to performing eight bicep curls in succession.Most people stick to a rep range of between 6-16 reps with a smaller rep range targeting muscle strength and size and a larger rep range targeting muscle endurance and tone.For the workouts in this eBook I will be using the follow rep ranges; 20 (to warm up), 12, 10, 8. However, if you want to focus more on a specific goal (muscle strength and size or muscle endurance and tone), you can increase or decrease this rep range as you see fit.
2. Sets
Sets refer to groups of reps. For example, if you perform eight reps of bicep curls and then stop and have a rest, that’s one set of bicep curls. If you perform eight reps of bicep curls, stop and have a rest and then perform a further eight bicep curls, that’s two sets.Most people stick to a set range of between 3-5 sets, depending on how many total exercises their workout includes. If their workout includes lots of exercises, they’re likely to go with three sets whereas if their workout includes very few exercises, they’re likely to increase the number of sets on each exercise to give their muscles a more challenging workout.For the workouts in this eBook I will be using four sets per exercise (one warm-up set and three regular sets). However, if you want to skip certain exercises and increase the set range or add extra exercises and reduce the set range, feel free to do so.
3. Splits
Splits refer to the way you split up your training program throughout the week. For example, if you train your chest, triceps, and shoulders on a Monday, your upper back and biceps on a Wednesday and your legs, abdominals and lower back on a Friday, that would be a three-day split. If you train your chest and triceps on a Monday, your upper back, and biceps on a Tuesday, your shoulders and legs on a Thursday and your abdominals and lower back on a Friday, that would be a four-day split.The way people split their workouts varies widely from person to person based on factors such as when they can get to the gym or whether they participate in any other physical activities during the week. For example, a person who plays team sports or attends exercise classes may prefer a three-day split. However, a person who has all their evenings free may find a five-day split more suitable.In this eBook, I’ll be providing you a three-day workout split, a four-day workout split and a five-day workout split, so you should be able to find one that’s suitable for you.
4. Compound Exercises
Compound exercises are muscle building exercises that utilize multiple joints and muscle groups. For example, the chest press is a compound exercise because it utilizes your elbow and shoulder joints and the muscles in your chest, shoulders, and triceps.Compound exercises are useful for building muscle size and strength and for targeting multiple muscle groups at once. They’re also useful for building functional strength that can be applied in your day to day life, as most of the exercises involve natural movements such as pushing and pulling.
5. Isolation Exercises
Isolation exercises are muscle building exercises that work a single joint and muscle group. For example, the bicep curl is an isolation exercise because it utilizes just your elbow joint and your bicep muscle.Isolation exercises are useful for toning and shaping specific muscles. They’re also useful for building strength in your weaker muscles. For example, if you find your triceps keep giving out when you perform the chest press, performing some isolation exercises on the triceps is a great way to remedy this.
Muscle Groups You Need To Be Training
Now that you have a basic understanding of the importance of eating a good quality diet, the different types of muscle building equipment and the key muscle building terms, it’s time to move onto discussing the different muscle building exercises. In this chapter, I’m going to be providing you with an overview of the main body parts that you need to train as part of this beginner’s muscle building workout. Then in the following chapters I’ll be providing you with a range of exercises that you can use to target each of these body parts.
1. Chest
The chest is the front part of your upper body and contains a number of large muscles. It is most commonly trained by pressing or curling weights above the chest. Most exercises that work the chest are compound exercises that also bring the triceps and shoulders into play, so the majority of workout plans train some or all of these muscle groups together on the same day.
2. Triceps
The triceps are the muscles at the rear, upper part of your arms which you can feel flex when you straighten your arms. They are most commonly trained by raising a weight from a bent arm position into a straight arm position. The triceps can be trained in isolation but they also get targeted during compound exercises such as the chest press and shoulder press.
3. Upper Back
The upper back is the rear part of your upper body and contains a number of large muscles. It is most commonly trained by pulling weights toward your chest using your upper back. The majority of exercises that work the upper back are compound exercises which also give your biceps and shoulders a secondary workout and because of this, most workout plans train some or all of these muscle groups collectively on the same day.
4. Biceps
The biceps are the muscles at the front, upper part of your arms which you can feel flex when you bend them. The most common to train your biceps is to curl a weight from a straight arm position into a bent arm position. The biceps can be trained in isolation but they also get brought into play during compound exercises such as the lateral pulldown and upright rows.
5. Forearms
The forearms are the muscles at the lower part of your arms which you can feel tight when you bend your wrists. They are most commonly trained by curling a weight from a straight wrist position into a bent wrist position. The wrists can be trained in isolation but since all the other muscle building exercises involve holding a weight and keeping it steady with your wrist, they are constantly being targeted when you workout.
6. Shoulders
The shoulders are the joints in the upper part of your body which connect your arms, chest and upper back and contain a number of large muscles. Since they are one of the most flexible joints in your body and connect to numerous muscles, they can be trained by using a variety of compound and isolation exercises.
7. Legs
The legs are the support structure at the lower part of your body and contain numerous large muscle groups including the quadriceps (the front part of your upper legs), the hamstrings (the rear part of your upper legs) and the calves (the rear part of your lower legs). Since they are a very large body part and contain numerous large muscle groups, they can be trained using various compound and isolation exercises.
8. Core
The core is the middle part of your body and includes your abdominals (the muscles at the front of your stomach), your obliques (the muscles at the side of your stomach) and your lower back. Like the shoulders and the legs, your core includes numerous muscle groups and so can be trained using a variety of compound and isolation exercises.
Chest Exercises
As mentioned in the previous chapter, chest exercises generally involve pressing or curling weights above your chest. In this chapter, I’ll be listing five specific exercises you can use to build up your chest.
1. Dumbbell Chest Press
Equipment Required:
- 2 dumbbells.
- 1 bench.
Instructions:
- Adjust the bench so that it’s flat.
- Sit upright on the bench, bend your knees and rest the dumbbells on top of them.
- Slowly lie back on the bench and as you do, raise the dumbbells up above your chest.
- Your Palms should be facing forward, slowly lower the dumbbells down toward your chest and stop just before the dumbbells touch your chest.
- Slowly push the dumbbells upward, stopping just before your arms fully lock.
- Repeat steps 4-5 for your chosen number of reps.
- Once you’ve done your last rep, slowly lower the dumbbells onto your knees, sit up and then put the dumbbells on the floor.
- Rest for 1 minute, then put your existing dumbbells back on the rack and pick up a new set of dumbbells that are suitable for your next set.
- Repeat steps 2-8 for your chosen number of sets.
- Once you’ve finished all your sets, give the bench a wipe with your towel and put the dumbbells back on the rack.
Dumbbell Chest Press Variations:
Incline Dumbbell Chest Press: Perform the exercise as described above but adjust the bench to an incline angle in order to place more emphasis on your upper chest and shoulders.
Decline Dumbbell Chest Press: Perform the exercise as described above but adjust the bench to a decline angle in order to place more emphasis on your lower chest.
2. Dumbbell Fly
Equipment Required:
- 2 dumbbells.
- 1 bench.
Instructions:
- Adjust the bench so that it’s flat.
- Sit upright on the bench, bend your knees and rest the dumbbells on top of them.
- Slowly lie back on the bench and as you do, raise the dumbbells up above your chest and bend your elbows slightly.
- Lower the dumbbells to the side, stopping when they’re level with your chest.
- Slowly raise the dumbbells back up to the starting position and make sure you’re doing most of the lifting with your chest muscles.
- Repeat steps 4-5 for your chosen number of reps.
- Once you’ve done your last rep, slowly lower the dumbbells onto your knees, sit up and then put the dumbbells on the floor.
- Rest for 1 minute, then put your existing dumbbells back on the rack and pick up a new set of dumbbells that are suitable for your next set.
- Repeat steps 2-8 for your chosen number of sets.
- Once you’ve finished all your sets, give the bench a wipe with your towel and put the dumbbells back on the rack.
Dumbbell Fly Variations:
Incline Dumbbell Fly: Perform the exercise as described above but adjust the bench to an incline angle in order to place more emphasis on your upper chest and shoulders.
Decline Dumbbell Fly: Perform the exercise as described above but adjust the bench to a decline angle in order to place more emphasis on your lower chest.
3. Barbell Chest Press
Equipment Required:
- 1 barbell.
- 1 bench with a barbell rack.
Instructions:
- Adjust the bench so that it’s flat.
- Place the barbell on the rack and load it up with the desired amount of weight.
- Lie back on the bench and place your hands on the barbell’s handgrips, making sure that your palms are facing forward.
- Slowly bring your arms forward while keeping them straight, stopping when the barbell is parallel with the lower part of your chest.
- Lower the barbell to your chest, stopping when the bar touches your chest.
- Slowly straighten your arms and raise the barbell back up to the starting position, making sure your chest muscles are doing most of the lifting.
- Repeat steps 4-5 for your chosen number of reps.
- Once you’ve done your last rep, slowly place the barbell back on the rack and sit up.
- Rest for 1 minute and then adjust the amount of weight on the barbell so that it’s suitable for your next set.
- Repeat steps 3-9 for your chosen number of sets.
- Once you’ve finished all your sets, give the bench a wipe with your towel and put the barbell and weight plates away.
Barbell Chest Press Variations:
Incline Barbell Chest Press: Perform the exercise as described above but adjust the bench to an incline angle in order to place more emphasis on your upper chest and shoulders.
Decline Barbell Chest Press: Perform the exercise as described above but adjust the bench to a decline angle in order to place more emphasis on your lower chest.
4. Machine Chest Press
Equipment Required:
- 1 chest press machine.
Instructions:
- Adjust the chest press machine height so that the handles are parallel with your chest.
- Move the pin and select the desired amount of weight.
- Press down on the foot lever with both feet and grab the handles with both hands, your palms should be facing the floor.
- Hold the weight steady with your hands and place your feet back on the floor.
- Slowly bend your arms and bring the handles toward your chest, stopping just before the plates on the machine touch.
- Slowly push the handles forward, stopping just before your arms fully lock and make sure your chest does most of the lifting.
- Once you’ve done your last rep, press down on the foot lever with both feet and hold the weight steady, take your hands off the handles and slowly lower the weight back down to the starting position.
- Rest for 1 minute and then adjust the weight so that it’s suitable for your next set.
- Repeat steps 2-9 for your chosen number of sets.
- Once you’ve finished all your sets, give the chest press machine a wipe with your towel.
Machine Chest Press Variation:
Hammer Grip Machine Chest Press: Perform the exercise as described above but grab the handles in a hammer grip and make sure your palms are facing each other for a tougher version of this exercise.
5. Machine Pec Deck
Equipment Required:
- 1 pec deck machine.
Instructions:
- Sit in the pec deck machine and adjust the seat height so that the pads are parallel with your chest.
- Adjust the pads so that they are as far back as you can go without overstretching yourself.
- Move the pin and select the desired amount of weight.
- Place your forearms on the pads and grab the handles with both hands.
- Slowly press against the pads with your forearms, squeeze with your chest muscles and bring the pads together, stopping when they touch.
- Slowly lower the pads back down, stopping just before the plates on the machine touch.
- Once you’ve done your last rep, lower the pads all the way down to the starting position and allow the plates on the machine to touch.
- Rest for 1 minute and then adjust the weight so that it’s suitable for your next set.
- Repeat steps 2-9 for your chosen number of sets.
- Once you’ve finished all your sets, give the pec deck machine a wipe with your towel.
Machine Pec Deck Variation:
No Handle Machine Pec Deck: Perform the exercise as described above but place your hands on the pads instead of the handle for a tougher version of this exercise.
Tricep Exercises
Tricep exercises are generally isolation movements which involve you lifting a weight from a bent arm position into a straight arm position. In this chapter, I’ll be providing you with five of the best tricep exercises around.
1. Dumbbell Skull Crusher
Equipment Required:
- 2 dumbbells.
- 1 bench.
Instructions:
- Adjust the bench so that it’s flat.
- Sit upright on the bench, bend your knees and rest the dumbbells on top of them.
- Slowly lie back on the bench and as you do, raise the dumbbells up above your chest.
- Keep your elbows parallel with your chest, then slowly bend your arms and lower the dumbbells toward
- your forehead, stopping just before they touch it.
- Slowly straighten your arms and lift the dumbbells back up to the starting position, stopping just before your arms fully lock.
- Repeat steps 4-5 for your chosen number of reps.
- Once you’ve done your last rep, slowly lower the dumbbells onto your knees, sit up and then put the dumbbells on the floor.
- Rest for 1 minute, then put your existing dumbbells back on the rack and pick up a new set of dumbbells that are suitable for your next set.
- Repeat steps 2-8 for your chosen number of sets.Once you’ve finished all your sets, give the bench a wipe with your towel and put the dumbbells back on the rack.
Dumbbell Skull Crusher Variation:Single Dumbbell Skull Crusher: Perform the exercise as described above but instead of holding two dumbbells, hold one heavier dumbbell with both hands.
2. Dumbbell Tricep Kickback
Equipment Required:
- 1 bench.
- 1 dumbbell.
Instructions:
- Adjust the bench so that it’s flat.
- With your right hand pick the dumbbell, place your left knee and left hand on the bench and maintain your balance.
- Bring your right elbow up until it’s at a 90-degree angle and your right upper arm is in line with your upper body.
- Slowly straighten your right arm and lift the dumbbell up behind you, stopping just before your arm fully locks.
- Slowly bend your right arm and lower the dumbbell back down, stopping when your arm is bent at a 90-degree angle.
- Repeat steps 4-5 for your chosen number of reps.
- Switch the dumbbell over to your left hand, place your right hand and knee on the bench, get your balance by planting your left foot on the floor.
- Slowly straighten your left arm and lift the dumbbell up behind you, stopping just before your arm fully locks.
- Slowly bend your left arm and lower the dumbbell back down, stopping when your arm is bent at a 90-degree angle.
- Once you’ve done your last rep, put the dumbbell on the floor, take your right knee off the bench and stand up.
- Rest for 1 minute, then put your existing dumbbell back on the rack and pick up a new dumbbell that is suitable for your next set.
- Repeat steps 2-12 for your chosen number of sets.
- Once you’ve finished all your sets, give the bench a wipe with your towel and put the dumbbells back on the rack.
Dumbbell Tricep Kickback Variation:
Bent Over Two-Dumbbell Tricep Kickback: Perform the exercise as described above but instead of holding one dumbbell, hold two lighter dumbbells with both hands and instead of using a bench for support, bend over and support yourself.
3. Barbell Skull Crusher
Equipment Required:
- 1 barbell.
- 1 bench with a barbell rack.
Instructions:
- Adjust the bench so that it’s flat.
- Place the barbell on the rack and load it up with the desired amount of weight.
- Lie back on the bench and place your hands on the barbell’s handgrips, making sure that your palms are facing forward.
- Slowly Bring your arms forward while keeping them straight, stopping when the barbell is parallel with the lower part of your chest.
- Keep your elbows parallel with your chest, then slowly bend your arms and lower the barbell toward your forehead, stopping just before the barbell touches it.
- Slowly straighten your arms and lift the barbell back up to the starting position, stopping just before your arms fully lock.
- Once you’ve done your last rep, slowly place the barbell back on the rack and sit up.
- Rest for 1 minute and then adjust the amount of weight on the barbell so that it’s suitable for your next set.
- Repeat steps 3-9 for your chosen number of sets.Once you’ve finished all your sets, give the bench a wipe with your towel and put the barbell and weight plates away.
Barbell Skull Crusher Variations:
Incline Barbell Skull Crusher: Perform the exercise as described above but adjust the bench to an incline angle in order to place more emphasis on the upper part of your triceps.
Decline Barbell Skull Crusher: Perform the exercise as described above but adjust the bench to a decline angle in order to place more emphasis on the lower part of your triceps.
4. Standing Barbell Tricep Extension
Equipment Required:
- 1 barbell.
Instructions:
- Bend down, place your hands on the barbell’s handgrips with your palms facing toward you, stand up straight and slowly lift the barbell up above your head.
- Keep your elbows parallel with your shoulders and the side of your head, then slowly bend your arms and lower the barbell down behind your head, stopping when your elbows are bent at a 90-degree angle.
- Slowly straighten your arms and lift the barbell back up to the starting position, stopping just before your arms fully lock.
- Once you’ve done your last rep, slowly lower the barbell down in front of you and place it on the floor.
- Rest for 1 minute and then adjust the amount of weight on the barbell so that it’s suitable for your next set.
- Repeat steps 2-7 for your chosen number of sets.
- Once you’ve finished all your sets, put the barbell and weight plates away.
Standing Barbell Tricep Extension Variation:
Seated Barbell Tricep Extension: Perform the exercise as described above but instead of standing up, sit on a flat bench. Doing this places less emphasis on your balance and core stability and allows you to focus fully on the tricep extension.
5. Cable Tricep Extension
Equipment Required:
- 1 cable machine.
Instructions:
- Adjust the cable so that it’s at its highest height.
- Grab a straight bar and attach it to the cable.
- Move the pin and select the desired amount of weight.
- Grab the straight bar with both hands, making sure that your palms are facing downward and stand up straight, making sure that your elbows are tucked in and your knees are slightly bent.
- Keep your elbows tucked in, then slowly straighten your arms and push the straight bar down toward the floor, stopping just before your arms fully lock.
- Slowly straighten your arms and bring the straight bar back up, stopping when your elbows are bent at a 90-degree angle.
- Once you’ve done your last rep, bring the straight bar all the way up to the starting position and allow the plates on the machine to touch.
- Rest for 1 minute and then adjust the weight so that it’s suitable for your next set.
- Repeat steps 4-9 for your chosen number of sets.
- Once you’ve finished all your sets, give the straight bar a wipe with your towel.
Cable Tricep Extension Variations:Reverse Grip Cable Tricep Extension: Perform the exercise as described above but reverse the grip so that your palms are facing upward. Doing this brings your forearms into play and hits your triceps from a different angle.
Single Arm Tricep Extension: Perform the exercise as described above but instead of using a straight bar, use a single handle and perform the exercise with one arm and then the other. Doing this allows you to fully focus on each tricep individually and prevents a stronger tricep compensating for a weaker one.
Upper Back Exercises
Upper back exercises are mostly compound movements which involve you pulling weights toward your body with your upper back. In this chapter, I’ll be outlining five of the top exercises you can use to add size and strength to your upper back.
1. Bent Over Dumbbell Row
Equipment Required:
- 2 dumbbells.
Instructions:
- Grab a dumbbell in each hand, stand up straight and hold the dumbbells by your side, making sure your palms are facing inward.
- Lean forward at the waist until you’re at a 45-degree angle, making sure you keep your arms, legs and upper body straight.
- The Dumbbells should be held in front of you so that they are parallel with your chest, bend your knees slightly, then slowly bend your arms and lift the dumbbells up toward your stomach, stopping once your arms are fully bent.
- Slowly straighten your arms and lower the dumbbells back down, stopping just before your arms fully lock.
- Repeat steps 4-5 for your chosen number of reps.
- Once you’ve done your last rep, slowly lower the dumbbells down and place them on the floor.
- Rest for 1 minute, then put your existing dumbbells back on the rack and pick up a new set of dumbbells that are suitable for your next set.
- Repeat steps 2-7 for your chosen number of sets.
- Once you’ve finished all your sets, give the bench a wipe with your towel and put the dumbbells back on the rack.
Bent Over Dumbbell Row Variations:
Bent Over Single Dumbbell Row: Perform the exercise as described above but instead of using two dumbbells at the same time, use one dumbbell and perform the exercise with one arm and then the other. Doing this allows you to fully focus on each side of your body individually.
Upright Dumbbell Row: Perform the exercise as described above but instead of bending over, stand up straight and raise the dumbbell up toward your chin. Doing this targets the top part of your upper back.
2. Kneeling Bent Over Dumbbell Row
Equipment Required:
- 1 bench.
- 1 dumbbell.
Instructions:
- Adjust the bench so that it’s flat.
- Pick the dumbbell in your right hand, place your left knee and left hand on the bench, put your right foot on the floor and get your balance.
- Slowly bend your right arm and lift the dumbbell up toward your stomach, stopping when your arm is fully bent.
- Slowly straighten your right arm and lower the dumbbell back down, stopping just before your arm fully locks.
- Now pick the dumbbell with your left hand, place your right knee and right hand on the bench, get your balance by placing your left foot on the floor
- Slowly bend your right arm and lift the dumbbell up toward your stomach, stopping when your arm is fully bent.
- Slowly straighten your right arm and lower the dumbbell back down, stopping just before your arm fully locks.
- Repeat steps 7-8 for your chosen number of reps.
- Once you’ve done your last rep, put the dumbbell on the floor, take your right knee off the bench and stand up.
- Rest for 1 minute, then put your existing dumbbell back on the rack and pick up a new dumbbell that is suitable for your next set.
- Repeat steps 2-11 for your chosen number of sets.
- Once you’ve finished all your sets, give the bench a wipe with your towel and put the dumbbells back on the rack.
Kneeling Bent Over Dumbbell Row Variations:
Standing Bent Over Single Dumbbell Row: Perform the exercise as described above but instead of kneeling on the bench, stand up and bend over. Doing this tests your balance and core stability at the same time as building your upper back.
Standing Bent Over Two-Dumbbell Row: Perform the exercise as described above but instead of using one dumbbell grab two and instead of kneeling on the bench, stand up and bend over. Doing this tests your balance and core stability at the same time as building your upper back and allows you to complete the exercise faster.
3. Bent Over Barbell Row
Equipment Required:
- 1 barbell.
Instructions:
- Bend down, place your hands on the barbell’s handgrips with your palms facing toward you, stand up straight and slowly lift the barbell up off the floor.
- Lean forward at the waist until you’re at a 45-degree angle, making sure you keep your arms, legs and upper body straight.
- Bend your knees slightly, then slowly bend your arms and lift the barbell up toward your stomach, stopping just before the barbell touches it.
- Slowly lower the barbell back down, stopping just before your arms fully lock.
- Repeat steps 4-5 for your chosen number of reps.
- Once you’ve done your last rep, slowly lower the barbell down in front of you and place it on the floor.
- Rest for 1 minute and then adjust the amount of weight on the barbell so that it’s suitable for your next set.
- Repeat steps 2-8 for your chosen number of sets.
- Once you’ve finished all your sets, give the barbell a wipe with your towel and put the barbell and weight plates away.
Bent Over Barbell Row Variation:Upright Barbell Row: Perform the exercise as described above but instead of bending over, stand up straight and raise the barbell up toward your chin. Doing this targets the top part of your upper back.
4. Lat Pulldown
Equipment Required:
- 1 lat pulldown machine.
Instructions:
- Sit in the lat pulldown machine and adjust the thigh pads so that they are firmly pressed against your thighs.
- Move the pin and select the desired amount of weight.
- Grab the wide bar with both hands, making sure that your palms are facing forward.
- Slowly bend your arms and pull the wide bar down toward your chest, stopping just before it touches your chest and making sure you don’t lean back as you pull.
- Slowly straighten your arms and bring the wide bar back up, stopping just before your arms fully lock.
- Once you’ve done your last rep, bring the wide bar all the way up to the starting position and allow the plates on the machine to touch.
- Rest for 1 minute and then adjust the weight so that it’s suitable for your next set.
- Repeat steps 3-8 for your chosen number of sets.
- Once you’ve finished all your sets, give the wide bar a wipe with your towel.
Lat Pulldown Variations:
Reverse Grip Lat Pulldown: Perform the exercise as described above but instead of having a wide grip and your palms facing forward, narrow your grip and have your palms facing you. Doing this places more emphasis on your biceps and hits your upper back from a different angle.
Close Grip Lat Pulldown: Perform the exercise as described above but instead of using the standard wide bar, attach a close grip handle. Doing this places more emphasis on your biceps and hits your upper back from a different angle.
5. Seated Cable Row
Equipment Required:
- 1 cable machine.
Instructions:
- Adjust the cable so that it’s at its lowest height.
- Grab a close grip handle and attach it to the cable.
- Move the pin and select the desired amount of weight.
- Grab the close grip handle with both hands and sit down. Your legs need to be in front of you, making sure that your shoulders are pulled back and your knees and lower back are slightly bent.
- Slowly bend your arms and pull the close grip handle toward your stomach, stopping just before the handles touch it.
- Slowly straighten your arms and let the close grip handle move away from you, stopping just before your arms fully lock.
- Once you’ve done your last rep, bring the close grip handle all the way back to the starting position and allow the plates on the machine to touch.
- Rest for 1 minute and then adjust the weight so that it’s suitable for your next set.
- Repeat steps 4-9 for your chosen number of sets.
- Once you’ve finished all your sets, give the close grip handle a wipe with your towel.
Straight Bar Seated Cable Row Variation:
Straight Bar Seated Cable Row: Perform the exercise as described above but instead of using a close grip handle, use a straight bar. Doing this places less emphasis on your biceps and targets your upper back in a different way.
Bicep Exercises
The majority of bicep exercises are isolation movements that involve lifting a weight from a straight arm position into a bent arm position. In this chapter, I’ll be listing five of the most effective bicep exercises out there.
1. Standing Dumbbell Bicep Curl
Equipment Required:
- 2 dumbbells.
Instructions:
- Grab a dumbbell in each hand, hold them by your side, stand up straight and bend your knees slightly.
- Tuck your elbows in tight to your body, turn your hands so that your palms are facing away from your body, then slowly bend your arms and curl the dumbbells toward your shoulders, stopping once your biceps are fully flexed.
- Slowly straighten your arms and lower the dumbbells back down, stopping just before your arms fully lock.
- Repeat steps 2-3 for your chosen number of reps.
- Once you’ve done your last rep, slowly lower the dumbbells down in front of you and place them on the floor.
- Rest for 1 minute, then put your existing dumbbells back on the rack and pick up a new set of dumbbells that are suitable for your next set.
- Repeat steps 2-6 for your chosen number of sets.
- Once you’ve finished all your sets, put the dumbbells back on the rack.
Standing Dumbbell Bicep Curl Variations:Seated Dumbbell Bicep Curl: Perform the exercise as described above but instead of standing up, sit on a flat bench. Doing this places less emphasis on your balance and core stability and allows you to fully concentrate on working your biceps.
Reverse Grip Standing Dumbbell Bicep Curl: Perform the exercise as described above but instead of grabbing the dumbbells with your palms facing you, grab them with your palms facing away from you. Doing this places more emphasis on your forearms and also targets your biceps from a different angle.
2. Standing Dumbbell Hammer Curl
Equipment Required:
- 2 dumbbells.
Instructions:
- Grab a dumbbell in each hand, hold them by your side, stand up straight and bend your knees slightly.Tuck your elbows in tight to your body, turn your hands so that you’re holding the dumbbells like a hammer, then slowly bend your arms and curl the dumbbells toward your shoulders, stopping once your biceps are fully flexed.
- Slowly straighten your arms and lower the dumbbells back down, stopping just before your arms fully lock.Repeat steps 2-3 for your chosen number of reps.
- Once you’ve done your last rep, slowly lower the dumbbells down in front of you and place them on the floor.
- Rest for 1 minute, then put your existing dumbbells back on the rack and pick up a new set of dumbbells that are suitable for your next set.
- Repeat steps 2-6 for your chosen number of sets.
- Once you’ve finished all your sets, put the dumbbells back on the rack.
Standing Dumbbell Hammer Curl Variations:
Seated Dumbbell Hammer Curl: Perform the exercise as described above but instead of standing up, sit on a flat bench. Doing this places less emphasis on your balance and core stability and allows you to fully concentrate on working your biceps.
Seated Incline Dumbbell Hammer Curl: Perform the exercise as described above but instead of standing up, lie on a bench that’s adjusted to an inclined angle. Doing this places more emphasis on the upper part of your biceps.
3. Barbell Preacher Curl
Equipment Required:
- 1 barbell.
- 1 preacher curl bench.
Instructions:
- Place the barbell on the preacher curl bench rack and load it up with the desired amount of weight.
- Adjust the preacher curl bench so that your armpits are comfortably resting on the top of the pad when you’re seated, then sit down and put your arms in position on the pad.
- Stand up, lean forward slightly, place your hands on the barbell’s handgrips with your palms facing toward you, lift the barbell off the preacher curl bench rack and then sit back down, making sure your arms are still in position on the pad.
- Slowly bend your arms and curl the barbell toward your chest, stopping once your biceps are fully flexed.
- Slowly straighten your arms and lower the barbell back down, stopping just before your arms fully lock.
- Repeat steps 4-5 for your chosen number of reps.
- Once you’ve done your last rep, stand up, slowly lower the barbell down in front of you and place it on the preacher curl bench rack.
- Rest for 1 minute and then adjust the amount of weight on the barbell so that it’s suitable for your next set.
- Repeat steps 3-8 for your chosen number of sets.
- Once you’ve finished all your sets, give the barbell a wipe with your towel and put the barbell and weight plates away.
Barbell Preacher Curl Variation:Reverse Grip Barbell Preacher Curl: Perform the exercise as described above but instead of grabbing the barbell’s handgrips with your palms facing toward you, grab them with your palms facing away from you. Doing this places more emphasis on your forearms and also targets your biceps from a different angle.
4. Standing Barbell Bicep Curl
Equipment Required:
- 1 barbell.
Instructions:
- Place the barbell on the floor in front of you and load it up with the desired amount of weight.
- Bend down, place your hands on the barbell’s handgrips with your palms facing toward you, stand up straight and slowly lift the barbell up off the floor.
- Tuck your elbows in tight to your body, then slowly bend your arms and curl the barbell toward your chest, stopping once your biceps are fully flexed.
- Slowly straighten your arms and lower the barbell back down, stopping just before your arms fully lock.Repeat steps 3-4 for your chosen number of reps.
- Once you’ve done your last rep, slowly lower the barbell down in front of you and place it on the floor.
- Rest for 1 minute and then adjust the amount of weight on the barbell so that it’s suitable for your next set.
- Repeat steps 2-7 for your chosen number of sets.
- Once you’ve finished all your sets, give the barbell a wipe with your towel and put the barbell and weight plates away.
Standing Barbell Bicep Curl Variations:
Seated Barbell Bicep Curl: Perform the exercise as described above but instead of standing up, sit on a flat bench. Doing this places less emphasis on your balance and core stability and allows you to fully concentrate on working your biceps.
Reverse Grip Standing Barbell Bicep Curl: Perform the exercise as described above but instead of grabbing the barbell’s handgrips with your palms facing toward you, grab them with your palms facing away from you. Doing this places more emphasis on your forearms and also targets your biceps from a different angle.
5. Standing Cable Bicep Curl
Equipment Required:
- 1 cable machine.
Instructions:
- Adjust the cable so that it’s at its lowest height.
- Grab a straight bar and attach it to the cable.
- Move the pin and select the desired amount of weight.
- Grab the straight bar with both hands, making sure that your palms are facing upward, your back is straight and your legs are slightly bent.
- Tuck your elbows in tight to your body, then slowly bend your arms and curl the straight bar toward your chest, stopping once your biceps are fully flexed.
- Slowly straighten your arms and lower the straight bar back down, stopping just before your arms fully lock.
- Repeat steps 4-6 for your chosen number of reps.
- Once you’ve done your last rep, bring the straight bar all the way back to the starting position and allow the plates on the machine to touch.
- Rest for 1 minute and then adjust the weight so that it’s suitable for your next set.
- Repeat steps 4-9 for your chosen number of sets.
- Once you’ve finished all your sets, give the straight bar a wipe with your towel.
Standing Cable Bicep Curl Variation:Lying Cable Bicep Curl: Perform the exercise as described above but instead of standing up, lie on the floor in front of the cable machine. Doing this hits your biceps from a different angle.
Forearm Exercises
Many people neglect the forearms when getting started with weightlifting. However, by making forearm exercises part of your workout routine, you can build up your grip and ensure that your wrists don’t give out during other exercises. In this chapter, I’ll be providing you with five of the best forearm exercises around.
1. Seated Dumbbell Wrist Curl
Equipment Required:
- 2 dumbbells.
- 1 bench.
Instructions:
- Adjust the bench so that it’s flat.
- Grab the dumbbells and then sit on the bench.
- Rest your forearms on your knees, making sure that your wrists and the dumbbells are hanging over the edge of your knees and your palms are facing upright.
- Slowly bend your wrists and curl the dumbbells upward, stopping when your wrists are fully flexed.
- Slowly straighten your wrists and lower the dumbbells down, stopping just before your wrists fully lock.
- Once you’ve done your last rep, slowly lower the dumbbells down in front of you and place them on the floor.
- Rest for 1 minute, then put your existing dumbbells back on the rack and pick up a new set of dumbbells that are suitable for your next set.
- Repeat steps 2-7 for your chosen number of sets.Once you’ve finished all your sets, give the bench a wipe with your towel and put the dumbbells back on the rack.Seated Barbell Wrist Curl Variations:Reverse Grip Seated Dumbbell Wrist Curl: Perform the exercise as described above but instead of grabbing the dumbbells with your palms facing you, grab them with your palms facing away from you. Doing this increases the intensity of the exercise and gives your forearms a much more challenging workout.Single Arm Seated Dumbbell Wrist Curl: Perform the exercise as described above but instead of using two dumbbells at the same time, use one dumbbell and perform the exercise with one wrist and then the other. Doing this allows you to fully focus on each wrist individually.
2. Standing Dumbbell Wrist Curl
Equipment Required:
- 2 dumbbells.
Instructions:
- Grab a dumbbell in each hand, stand up straight with your knees slightly bent and hold your arms and the dumbbells by your side, making sure your palms are facing your body and that there’s a slight gap between your body and your hands.
- Slowly bend your wrists and curl the dumbbells upward, stopping when your wrists are fully flexed.Slowly straighten your wrists and lower the dumbbells back down, stopping just before your wrists fully lock.
- Once you’ve done your last rep, slowly lower the dumbbells down in front of you and place them on the floor.
- Rest for 1 minute, then put your existing dumbbells back on the rack and pick up a new set of dumbbells that are suitable for your next set.
- Repeat steps 2-6 for your chosen number of sets.
- Once you’ve finished all your sets, put the dumbbells back on the rack.
Seated Dumbbell Arnold Press Variation:Standing Dumbbell Arnold Press: Perform the exercise as described above but instead of using sitting on a bench, stand up straight. Doing this tests your balance and core stability at the same time as working your shoulders.
3. Seated Barbell Shoulder Press
Equipment Required:
1 barbell.1 bench with a shoulder press rack.
Instructions:
- Adjust the bench so that it’s upright.
- Place the barbell on the shoulder press rack and load it up with the desired amount of weight.
- Sit on the bench and make sure your back is straight up against the upright section of the bench
- Place your hands on the barbell’s handgrips, making sure that your palms are facing forward, then slowly straighten your arms and lift the barbell off the shoulder press rack, stopping just before your arms fully lock.
- Slowly bend your arms and lower the barbell down, stopping when the bar is parallel to your chin.
- Slowly straighten your arms and press the barbell up above your head, stopping just before your arms fully lock.
- Once you’ve done your last rep, slowly place the barbell back on the shoulder press rack and stand up.
- Rest for 1 minute and then adjust the amount of weight on the barbell so that it’s suitable for your next set.
- Repeat steps 3-9 for your chosen number of sets.
- Once you’ve finished all your sets, give the bench a wipe with your towel and put the barbell and weight plates away.Seated Barbell Shoulder Press Variation:
Standing Barbell Shoulder Press: Perform the exercise as described above but instead of using sitting on a bench, stand up straight. Doing this tests your balance and core stability at the same time as working your shoulders.
4. Barbell Shrug
Equipment Required:
- 1 barbell.
- 1 squat rack.
Instructions:
- Place the barbell on the squat rack and load it up with the desired amount of weight.
- Place your hands on the barbell’s handgrips, making sure that your palms are facing inward and then slowly lift the barbell off the squat rack.
- Make sure your back is straight, bend your knees slightly and then slowly shrug your shoulders upward while holding the barbell out in front of you.
- Slowly release the shrug and lower the barbell back down.
- Once you’ve done your last rep, slowly place the barbell back on the squat rack.
- Rest for 1 minute and then adjust the amount of weight on the barbell so that it’s suitable for your next set.
- Repeat steps 3-7 for your chosen number of sets.
- Once you’ve finished all your sets, put the barbell and weight plates away.Barbell Shrug Variation:
Reverse Grip Barbell Shrug: Perform the exercise as described above but instead of having your palms face inward, have them face outward. Doing this hits your shoulders from a different angle.
5. Machine Shoulder Press
Equipment Required:
- 1 chest press machine.
Instructions:
- Sit in the shoulder press machine and adjust the seat height so that the handles are parallel with the side of your head.
- Move the pin and select the desired amount of weight.
- Grab the handles with both hands using the wide grip and making sure that your palms are facing forward.
- Slowly straighten your arms and lift the handles up in your air, stopping just before your arms fully lock.
- Slowly bend your arms and lower the handles back down to the side of your head, stopping just before the plates on the machine touch.
- Repeat steps 4-5 for your chosen number of reps.
- Once you’ve done your last rep, slowly lower the handles all the way down to the starting position and allow the plates on the machine to touch.
- Rest for 1 minute and then adjust the weight so that it’s suitable for your next set.
- Repeat steps 3-8 for your chosen number of sets.
- Once you’ve finished all your sets, give the shoulder press machine a wipe with your towel.
Dumbbell Squat Variation:
<p “=”” class=”class=”strong/strongAlternate Grip Dumbbell Squat: Perform the exercise as described above but instead of holding the dumbbells up next to your shoulders, hold them down by your side. Doing this makes it easier to balance as you squat and hits your leg muscles from a different angle./p/divdiv class=”thrv_wrapper thrv_heading” data-tag=”h2″h2 id=”tab-con-58″strong2. Dumbbell Romanian Deadlift/strong/h2/divdiv class=”thrv_wrapper thrv_text_element tve_empty_dropzone”pstrongEquipment Required:/strong/pul class=””li class=””2 dumbbells./li/ulp class=”class=” tve-droppable””=””strongInstructions:br/strong/pol class=””li class=” class=” tve-droppable””=””Grab a dumbbell in each hand, hold them in front of your legs, stand up straight and bend your knees slightly./lili class=” class=” tve-droppable””=””Slowly lean forward by bending at the hips and lower the dumbbells toward the floor, stopping when your hamstrings feel tight./lili class=” class=” tve-droppable””=””Slowly straighten your hips and raise your body and the dumbbells back up to the starting position./lili class=” class=” tve-droppable””=””Repeat steps 3-4 for your chosen number of reps./lili class=” class=” tve-droppable””=””Once you’ve done your last rep, slowly lower the dumbbells down in front of you and place them on the floor./lili class=” class=” tve-droppable””=””Rest for 1 minute, then put your existing dumbbells back on the rack and pick up a new set of dumbbells that are suitable for your next set./lili class=” class=” tve-droppable””=””Repeat steps 2-6 for your chosen number of sets./lili class=” class=” tve-droppable””=””Once you’ve finished all your sets, put the dumbbells back on the rack./li/ol/divdiv class=”thrv_wrapper thrv_heading” data-tag=”h2″h2 id=”tab-con-59″strong3. Barbell Squat/strong/h2/divdiv class=”thrv_wrapper thrv_text_element tve_empty_dropzone”pstrongEquipment Required:/strong/pul class=””li class=””1 barbell./lili class=””1 squat rack./li/ulp class=”class=” tve-droppable””=””strongInstructions/strong:/pol class=””li class=” class=” tve-droppable””=””Place the barbell on the squat rack so that it’s in line with the top of your shoulders and then load it up with the desired amount of weight./lili class=” class=” tve-droppable””=””Stand in front of the barbell with your back straight, a slight bend in your knees and the top of your shoulders touching the bar./lili class=” class=” tve-droppable””=””Place your hands on the barbell’s handgrips, making sure that your palms are facing forward, then slowly lift the barbell off the rock and onto your shoulders./lili class=” class=” tve-droppable””=””Slowly bend your knees and lower your body toward the ground while keeping your back straight, stopping when your butt is parallel with your knees./lili class=” class=” tve-droppable””=””Slowly straighten your knees and raise your body back up to the starting position.brRepeat steps 4-5 for your chosen number of reps./lili class=” class=” tve-droppable””=””Once you’ve done your last rep, slowly place the barbell back on the squat rack and take a couple of steps forward./lili class=” class=” tve-droppable””=””Rest for 1 minute and then adjust the amount of weight on the barbell so that it’s suitable for your next set./lili class=” class=” tve-droppable””=””Repeat steps 2-8 for your chosen number of sets./lili class=” class=” tve-droppable””=””Once you’ve finished all your sets, put the barbell and weight plates away./li/olp class=”class=” “=””>Barbell Squat Variation:
Front Barbell Squat: Perform the exercise as described above but instead of standing in front of the barbell when you lift it off the squat rack, stand behind it and hold it above your chest as you squat. Doing this brings your biceps into play and hits your leg muscles from a different angle.
4. Barbell Deadlift
Equipment Required:
- 1 barbell.
- 1 squat rack.
Instructions:
- Place the barbell on the squat rack so that it’s in line with the middle of your thighs and then load it up with the desired amount of weight.
- Place your hands on the barbell’s handgrips, tighten your core muscles, slowly lift the barbell off the rack and take a couple of steps back.
- Bend your knees, lean forward with your hips and lower your body down, stopping when your butt is parallel with your knees.
- Straighten your knees, straighten your hips and raise your body back up to the starting position.
- Repeat steps 3-4 for your chosen number of reps.
- Once you’ve done your last rep, step forward and slowly place the barbell back on the squat rack.
- Rest for 1 minute and then adjust the amount of weight on the barbell so that it’s suitable for your next set.
- Repeat steps 2-7 for your chosen number of sets.
- Once you’ve finished all your sets, put the barbell and weight plates away.
5. Machine Leg Press
Equipment Required:
- 1 leg press machine.
Instructions:
- Sit in the leg press machine, place your feet on the center of the platform and lower the seat down until your knees are bent at a 90-degree angle.
- Move the pin and select the desired amount of weight.
- Slowly straighten your knees and push against the platform, stopping just before your knees fully lock.
- Slowly bend your knees and lower your body back down, stopping just before the plates on the machine touch.
- Repeat steps 3-4 for your chosen number of reps.
- Once you’ve done your last rep, slowly lower your body all the way back down until the plates on the machine touch.
- Rest for 1 minute and then adjust the weight so that it’s suitable for your next set.
- Repeat steps 3-7 for your chosen number of sets.
- Once you’ve finished all your sets, give the leg press machine a wipe with your towel.
<p “=”” class=”class=”strongMachine Leg Press Variation:br/strong/pp “=”” class=”class=”>Low Foot Position Machine Leg Press: Perform the exercise as described above but instead of placing your feet in the center of the footplate, place your feet at the bottom. Doing this places more emphasis on your quads.